Find a printable version of this in the RAVEN User’s Manual

The AccuTouch process ensures accurate indexing of your board edges for the most accurate project positioning. This process will appear between the board positioning and load bit screen where it asks for the actual bit.

Load Bit

The RAVEN then moves the cutting head to the middle of the machine and asks for the first bit it needs for the project. In the case of a 2 sided project, it will ask for the AccuTouch Probe. Load the AccuTouch probe bit into the CarveTight chuck and press enter to proceed. 

Find Near Edge (Y)

The near edge is the keypad side of the machine. This location is also the same as the home location. Use the lip of the touch plate to hook firmly to the edge of the board. Then, manually move the cutting truck to the plate and lower it to be inside of the hole. Press ENTER and it will touch the surface of the plate and then move to touch the inside edge of the hole.

Remove Touch Plate 

After it has finished locating the Near Y Edge, the machine will instruct you to remove the touch plate and press Enter to proceed to the next step.

Find Back Edge (X)

The back edge is the left side of the machine when standing at the keypad side. The machine will move the board so you can access this back edge. Use the lip of the touch plate to hook firmly to the edge of the board. Then, manually move the cutting truck to the plate and lower it to be inside of the hole. Press ENTER and it will touch the surface of the plate and then move to touch the inside edge of the hole.

Remove Touch Plate 

After it has finished locating the Back X Edge, the machine will instruct you to remove the touch plate and press Enter to proceed to the next step.