To remove and replace the X-Drive Gears you will need the following tools:   Removing the X-Drive Gears   Reassembling the X-Drive Gears  

The RAVEN is a precision machine tool. With proper care and maintenance it will provide long, reliable service. WARNING: Always unplug the machine before attempting any maintenance on the machine. WARNING: If the machine is vibrating excessively and or making loud noises STOP and determine what is causing the issue. Continuing to run will result […]

In order to do a maintenance or part replacement on RAVEN, the head cover will need to be removed. It is a very simple procedure involving only 4 screws.

Replacing the Z-Truck is occasionally necessary in order to to change bearings or replace the part. This video demonstrates the simple process of removing the z-truck. Follow these instructions to install a Z-truck.

RAVEN’s are pre-leveled and aligned before shipping, but in transit can sometimes get knocked out of spec. Leveling the head is easy and quick with the steps in this video.

RAVEN’s are pre-leveled and aligned before shipping, but in transit can sometimes get knocked out of spec. Re-aligning the corner posts is easy and quick with the steps in this video.

The RAVEN comes with the head pressure pre-set, but there may be a need to recalibrate it on occasion. It is super simple to do using the steps outlined in this video.