Troubleshooting

Menu

CarveWright Support

Troubleshooting

Menu

Tutorial 4.2 – Import Image Part 2 – Photos

/SOFTWARE / Designer / Designer 1 / SOFTWARE / Designer / Designer 2 / SOFTWARE / Designer / Designer 3 / Learning Center / Video Tutorials / Tutorial 4.2 – Import Image Part 2 – Photos

January 3, 2019
admin
Designer 1/ Designer 2/ Designer 3/ Video Tutorials

Importing a photograph to make a lithophane.

Tagged:import image importing picture litho lithopane photo photograph

Related Articles

Designer 4/5 – Vcarve Suite Tutorial: Vector Groups with Text
Designer 4/5 – Vcarve Suite Tutorial: Vector Groups
Designer 4/5 Tutorial – Pocket Regions
Designer 4/5 Tutorial – SVG Importer
Designer 1-3 Activation Instructions
Pattern Editor – Rotate Tweak Tool

LEARN HERE

Follow the tutorials listed below for a linear learning experience. These lessons start from a very beginner level and advance you further with each lesson.

Designer 4

Designer 4 Installation
Designer 4 License Activation
Designer 4/5 Tutorial 1.1 – Software Layout Overview
Designer 4/5 Tutorial 2.1 – My First Sign: Part 1
Designer 4/5 Tutorial 2.2 – My First Project: Part 2
Designer 4/5 Tutorial 3.1 – Text Tool Overview
Designer 4/5 Tutorial – Project Tab
Designer 4/5 Tutorial – SVG Importer
Designer 4/5 Tutorial – Pocket Regions
Designer 4/5 – Vcarve Suite Tutorial: Vector Groups
Designer 4/5 – Vcarve Suite Tutorial: Vector Groups with Text

Designer BASICS

Tutorial 1.1 – Software Layout Basics
Tutorial 2.1 – First Project – Part 1
Tutorial 2.2 – First Project – Part 2
Tutorial 2.3 – Running Your First Project
Tutorial 3.1 – Text Tool Overview
Tutorial 3.2 – My First Sign
Tutorial 3.3 – My Vector Sign
Tutorial 4.1 – Import Image Part 1 – Graphics
Tutorial 4.2 – Import Image Part 2 – Photos
Tutorial 4.3 – Make a Lithophane Jig
Tutorial 5.1 – Carving Through A Board
Tutorial 5.3 – Invert, Appliques and Two Sided Carvings
Tutorial 5.2 – Domes and Merging
Tutorial 6.1 – English Pub Sign
Tutorial 6.2 – Large Tiled Sign

Designer 3 or Above Features

Tutorial 7.1 Designer 3 – Text Tool, Edit Envelope, Materials
Tutorial 8.1 Designer 3 – Make Patterns And Text Follow Along Paths
Tutorial 9.1 Vcarve Suite – Vector Group using Drawing Tools
Tutorial 9.2 Vcarve Suite – Vector Group using Imported DXF
Tutorial 10.0 Designer 3 – Flip Within Jig

Add-On Modules

Vcarve Suite Tutorials
STL Slicer Tutorials
DXF Layout Tutorials
Modeling Suite Tutorials
Drawing Suite Tutorials
- CarveWright Drawing Suite Overview
Sculptor Tutorials
Rotary Jig Software Tutorials

Tips & Tricks

Tips and Tricks

Quick Links

Software Downloads
Account Logins

CarveWright

About LHR Technologies
Warranty and Return Policy
Trademarks
Terms and Conditions
Privacy Notice

713 473 6572

M-F 9AM-12:30PM, 1:30-6PM CST

Copyright © LHR Technologies, Inc.