Possible Cause The machine has been updated with the A907 motor pack but the machine has not been configured to recognize this. The machine must be told where to look for the scanning probe. Solution Verify version 1.121 or later of the software and that the card firmware is updated. This is important since the […]
Category: A/B/C Probe
Introduction to the Scanning Probe
Introduction The CarveWright scanning probe enables the user to create a height map of and existing surface that can then be imported into the CarveWright Design Software libraries for use on any project. Please become familiar with the Probe Operators Manual as it explains will explain, in depth, the many features of the CarveWright Scanning […]