Raster carving is how to make highly detailed carvings. The default settings are sufficient for most operations, but if you’re setting up a new bit or are dialing in new material settings, you may wish to make changes. This video explains the settings available for making those changes.
The Bit Builder gives users the ability to add new or custom configure existing bits. This will allow for ultimate control over all the speed, feed, and spindle settings for every bit. Custom bits can be stored globally in your system or are stored on a project level. This means if someone designs a project
Installing collets into the RAVEN ER11 Adapter. Purchase the ER11 Adapter: https://carvewright.com/product/er11-adapter-bundle-kit-for-raven-cnc/
The blades used are 2mm shaft blades. Most blades compatible with Cricut and similar vinyl cutters will work. These blades are inexpensive and readily available through a number of outlets including Amazon. BE AWARE: The blades with black or painted shafts will not work as they must be conductive to work with the touch plate.
[accordion] [accordion_block title=”Can I use my own bits?”] RAVEN Machines: Yes. There is a standard library of bits that can be used, but bits can be programmed using the bit builder in the software. Bit settings can also be shared through projects. A/B/C Machines: No. The software has a standard library of approved bits that
For support use the contact form, or call 713-473-6572 and leave a message. Our support staff will respond within one business day.
© CarveWright | All rights reserved
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Site Created by Elevantics