This is a detailed demonstration of how to cut curcuit boards with a RAVEN CNC router. The video covers making the jig, importing and laying out the board project, and…
Raster carving is how to make highly detailed carvings. The default settings are sufficient for most operations, but if you’re setting up a new bit or are dialing in new…
The Bit Builder gives users the ability to add new or custom configure existing bits. This will allow for ultimate control over all the speed, feed, and spindle settings for…
The blades used are 2mm shaft blades. Most blades compatible with Cricut and similar vinyl cutters will work. These blades are inexpensive and readily available through a number of outlets…
The cut path tool is an automatic way to cut a shape out of your project board. It also automatically adds tabs to hold the cutout in place. This tutorial…
The Centerline Text feature adds an additional Rout Mode in the Text Tool feature. This feature uses the 60° and 90° V-groove bits to follow the center of the letters…
The Extrude tool allows a profile to be extruded along the inside of a closed vector shape. The angle of the extrusion can be adjusted by setting horizontal, vertical, or…
The Sweep tools will allow a drawn profile to be swept along a single vector path. This means the profile will follow the line along it’s entire length. There are…
The Tilt Tool, available in the Modeling Suite, allows a pattern to be tilted vertically, horizontally, or a combination of both can be used to achieve different angles.
