Get started with learning Designer here! This video walks you through the Designer user interface with a brief explanation of what everything is.

This tutorial covers the basics of laying out a simple project to get familiar with the user interface and essential tools.

This tutorial expands on the project in part 1 by adding a background and learning about project optimization.

This video covers how to design a basic sign and optimize it for carving.

Bit Optimization sets the limit with which the bit carves into tight areas to preserve the top level detail.

Draft sets an angle from the outer top edge of raised carvings out to the base of the carving. It is primarily used to reduce chip-out issues.

There are many 3D models already prepared for CNC available as STL files all over the internet. The best way to import these ready to carve STL files is with…

Description of Issue When trying to import an STL file with the STL Slicer or Pattern Sculptor, it fails and reports “Invalid or corrupted STL file”. Possible Causes Most likely…

This video illustrates the process of importing, scaling, and splitting a vector design across multiple boards. This application was for used for carving an up-cycled cedar fence.

Did you know you can make carving patterns with just the BASIC software tools? This is a quick and easy demonstration of making vines by drawing lines and using the…

Description of Issue When trying to import an STL file with the STL Slicer, it fails and reports a Runtime Error!. Possible Causes Most likely the STL file is too…

The CarveWright Rotary Jig can be used to create unique lithophanes using common PVC plumbing pipe. The results are impressive! Now you can create unique lithophanes that most people have never…