The board sensor, located on the bottom of the z-truck, may get clogged with dust over time. Use these steps to check it and clean it, when necessary. We highly suggest a dust collection insert be added to your system. Choose one of these two.
Description of Issue This error appears when the sensor used to find the edges of the workpiece is not seeing reading within its operational limits. The sensor system consists of an infrared LED and an infrared detector. The board sensor works by reflecting infrared light off of the board and reading the intensity of the
Description of Issue The edge detect failure occurs when the board sensor gets bad data when looking for a board edge during the initial measuring and homing part of the project. Possible Causes Causes include: a low board sensor reading, a very dark color workpiece, sawdust on the sliding plate, a hole in the board,
For support use the contact form, or call 713-473-6572 and leave a message. Our support staff will respond within one business day.
© CarveWright | All rights reserved
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Site Created by Elevantics