Description of Issue The cut motor audibly changes pitch during a carving. This is indicative of the sensor losing track of the RPM and defaulting to a pre-programmed speed. Possible Causes The cause of this change is most likely a faulty board sensor or sensor magnet. Troubleshooting Steps Check to see that the cut motor […]
Articles Tagged: RPM
Check Cut Motor
Description of Issue The machine can report a Check Cut Motor message when the sensors are not reading the expected cut motor RPM. This cut motor message can be disregarded if the user desires. The motor will run without the sensor feedback but may run fast. Possible Causes Causes include: a cut motor that is […]