If you have received a package that was damaged due to shipping by UPS. Please follow the steps down below, before submitting your photos to CarveWright. The email you be sending the photos to is: support@carvewright.com Although a physical inspection at a UPS-approved facility (location) is typically required for damage package claims, photo documentation can […]
Category: Maintenance & Repair
Traction Belts not moving
Description of Issue Traction belts not moving when head is cracked down on board. Or when testing the x-axis, you will be able to hear the x motor running but the belts are not moving or knocking. Possible Causes Cause can be: that the x drive gear plate assembly is stripped, on older machines that […]
Replacing Crank Torque Plate
Replacing the Crank Torque Plate To remove and replace the crank torque plate you will need the following tools: #2 Phillips screwdriver (magnetic tip preferred) 8mm open end wrench Blue Loctite Armor Plate with Moly-D You will need to remove the left side panel and disassemble the stabilizer, follow this guide to remove the side […]
Controller Electronics Board – Replacement
Controller Electronics Board – Replacement (PDF) Package for Shipping Video Removing Controller Video Installing Controller Video
Board Tracking Sensor – Replacement
Board Tracking Sensor – Replacement (PDF)
Suggested Maintenance Schedule
Care and Maintenance The CarveWright is a precision machine tool. With proper care and maintenance it will provide long, reliable service. Below are regular maintenance guides and instructions on how to properly care for your CarveWright. WARNING: Always unplug machine before attempting any troubleshooting or maintenance on the machine. REGULAR MAINTENANCE MAINTENANCE SCHEDULE & INSTALLATION […]