One of the most important items (and commonly missed) when getting started with the CarveWright CNC System is that the projects you carve need to be “Under the Rollers”. To do this, you need to make your actual project board 7” longer than the “virtual” board that appears in the Project Designer software when you […]
Board Tracking Sensor – Replacement (PDF)
Description of Issue Broken or stripped X drive gears will be evident when the board stops moving through the machine when it is commanded. Usually, this stoppage will be accompanied by a grating noise from the X- gear enclosure on the right side of the machine. Once the gears are broken or stripped they will
Description of Issue This occurs when the machine measures differently in the length (or X) direction in seemingly similar situations. For example, you measure two similar colored and conditioned boards and the machine comes up with widely varying lengths. Possible Causes Cause can be: board defects, rolled up belt, low head pressure, damaged or missing
Maintenance video describing possible reasons for a tracking error
For support use the contact form, or call 713-473-6572 and leave a message. Our support staff will respond within one business day.
© CarveWright | All rights reserved
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Site Created by Elevantics