Support

A/B/C Troubleshooting

A/B/C Model LCD Messages

Edge Detection Failure Message

Description of Issue The edge detect failure occurs when the board sensor gets bad data when looking for a board edge during the initial measuring and homing part of the project. Possible Causes Causes include: a low board sensor reading, a very dark color workpiece, sawdust on the sliding plate, a hole in the board, […]

A/B/C Model LCD Messages

Check Cut Motor

Description of Issue The machine can report a Check Cut Motor message when the sensors are not reading the expected cut motor RPM. This cut motor message can be disregarded if the user desires. The motor will run without the sensor feedback but may run fast. Possible Causes Causes include: a cut motor that is

A/B/C Model LCD Messages

Board Too Thick to Cut

Description of Issue The “Board Too Thick to Cut” message appears on the LCD screen when the machine measures the inserted board thickness and determines that it is thicker than the cutting bit can cut all the way through. This message will only appear if there is a cutting operation in the project. Possible Causes